7 2 5 7 7 A P MAXTOR
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 3.5"/SLIMLINE Cylinders | 4996| |
Capacity form/unform 2577/ MB Heads 8| 16| |
Seek time / track 12.0/ 2.0 ms Sector/track | 63| |
Controller IDE / ATA2 FAST/ENHA Precompensation
Cache/Buffer 128 KB MAXCACHE Landing Zone
Data transfer rate 5.000 MB/S int Bytes/Sector 512
16.700 MB/S ext PIO4
Recording method RLL 1/7 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 5 55 | -40 71
Power: sleep 0.4 W Humidity % 5 95 | 5 95
standby 0.6 W Altitude km -0.061 3.048| -0.061 12.192
idle 4.5 W Shock g 35 | 150
seek 5.4 W Rotation RPM 4480
read/write 5.5 W Acoustic dBA 39
spin-up 13.3 W ECC Bit
MTBF h 300000
Warranty Month
Lift/Lock/Park YES Certificates
**********************************************************************
L A Y O U T
**********************************************************************
MAXTOR 72700AP/72577AP/72025AP/71687A/AP/71350A/AP QUICK REFERENCE
J1 IDE Interface J2 Power
+----------------------------------------++J50------J42------+
|o o o o o o o o o o o o o o o o o o o 1 || o o o o | OOOO |
|o o o o o o o o o o o o o o o o o o o || o o o o o | |
+----------------------------------------++-----------+------+
====================================================================
J1 IDE Interface J2 Power
+----------------------------------------++J46--J42---+------+
|o o o o o o o o o o o o o o o o o o o 1 || o o o | OOOO |
|o o o o o o o o o o o o o o o o o o o || o o o | |
+----------------------------------------++-----------+------+
**********************************************************************
J U M P E R S
**********************************************************************
MAXTOR 72700AP/72577AP/72025AP/71687A/AP/71350A/AP QUICK REFERENCE
Jumper Setting
==============
J1 IDE Interface J2 Power
+----------------------------------------++J50------J42------+
|o o o o o o o o o o o o o o o o o o o 1 || o o o o | OOOO |
|o o o o o o o o o o o o o o o o o o o || o o o o o | |
+----------------------------------------++-----------+------+
J50 Master Slave
-----------------
CLOSED Only drive in single drive system (default)
CLOSED Master in dual drive system
OPEN Slave in dual drive system
J48 Cable Select
-----------------
OPEN Disabled (default)
CLOSED Enabled
J46 Write Cache
----------------
OPEN Enabled (default)
CLOSED Disabled
J44 FACTORY RESERVED
--------------------
OPEN
J42 4092 Cylinder Option
-------------------------
OPEN Disabled (default)
CLOSED Enabled
Setting System BIOS
-------------------
Power up the computer and set the system BIOS/CMOS to Type 9.
NOTE
Refer to your system's user guide for help on enabling and
programming system BIOS CMOS.
Type 9 should equal 900 cylinders 15 heads and 17 sectors per track
(SPT). If BIOS Type 9 does not match these parameters, select a user
definable drive type and program the BIOS with 900 cylinders, 15
heads and 17 SPT. If the BIOS does not have a user-definable drive
type, choose a drive type with 15 heads and 17 SPT. This will allow
the system to see the hard drive.
Important Note for Installing Drives larger than 2.1GB
------------------------------------------------------
If your system locks up before you can access the system BIOS/CMOS,
the system may have a BIOS with a 4095 cylinder limitation. Please
perform the following steps:
1. Turn off the system.
2. Install jumper J42 on the drive using the spare jumper supplied.
3. Restart the system and set the system BIOS/CMOS to Type 9.
===================================================================
J1 IDE Interface J2 Power
+----------------------------------------++J46--J42---+------+
|o o o o o o o o o o o o o o o o o o o 1 || o o o | OOOO |
|o o o o o o o o o o o o o o o o o o o || o o o | |
+----------------------------------------++-----------+------+
J46 Master Slave
-----------------
CLOSED Only drive in single drive system (default)
CLOSED Master in dual drive system
OPEN Slave in dual drive system
J44 Cable Select
-----------------
OPEN Disabled (default)
CLOSED Enabled
J42 Write Cache
----------------
OPEN Enabled (default)
CLOSED Disabled