S T 1 1 7 0 0 N SEAGATE
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 3.5"/HH Cylinders 2626| | |
Capacity form/unform 1430/ 1700 MB Heads 13| | |
Seek time / track 10.0/ 2.0 ms Sector/track | | |
Controller SCSI2 SI/FAST Precompensation
Cache/Buffer 256 KB Landing Zone
Data transfer rate 4.000 MB/S int Bytes/Sector 512
10.000 MB/S ext SYNC
Recording method RLL 1/7 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 5 50 | -40 70
Power: sleep W Humidity % |
standby 9.0 W Altitude km |
idle W Shock g |
seek W Rotation RPM 5400
read/write W Acoustic dBA
spin-up W ECC Bit
MTBF h 500000
Warranty Month 60
Lift/Lock/Park YES Certificates
**********************************************************************
L A Y O U T
**********************************************************************
SEAGATE ST11700N/12400N PRODUCT DESCRIPTION
+---------------------------------------------------------+
|1-+ +---1 J5 |XX
|| |J6 +---+ |XX SCSI
|+-+ +1 |XX I/O
| || |XX
| || |XX
| Terminating ++ |XX
| Resistors +1 |XX
| || |XX
| || |XX
| ++ |XX
| +1 |XX
| || |XX
| || |XX
| ++ |X1
| |
++LED +---------1 J2 |XX Power
++ +---------+ |XX
+---------------------------------------------------------+ 1
**********************************************************************
J U M P E R S
**********************************************************************
SEAGATE ST11700/12400-N PRODUCT DESCRIPTION
Jumper setting
==============
Each disk drive has one or more option select header connectors on
the back, side or front where jumper plugs are installed to select
the way that the drive is to be configured or to select its ID on the
I/O bus.
J2 Motor Start/Write Protect/Terminator Power
----------------------------------------------
Position Numbers
+-1--2--3--4--5--6--7--8-+ X J3 Power
---------+ o X o o o o o 1 +---------X
| o X o o o o xxxx |
+----+-------------------+ \ Position A
Position 2
1 for Factory use only.
2 Jumper installed in position 2 enables the Delayed Motor
Start option (if jumper in position 3 is off). Motor start
delays is 16 times the drive ID number in seconds; i.e. drive
ID 0 starts immediately. Drive one starts 16 seconds later,
etc.
3 Jumper installed enables Motor Start option. The drive waits
for the Start unit command from the host before starting the
spindle motor. If no jumper is installed, drive operation de-
pends on wether or not there is a jumper in position 2.
If jumpers 2 and 3 are both off, drive spins up with no delay
when power is applied.
4 Jumper installed means entire drive is write protected.
5 Jumper installed means parity checking by the drive is
enabled.
6 Enables Terminator Resistor
7 Select terminator power source. In position 8 the drive
8 supplies power to the SCSI bus, pin 26. In position 7 drive
supplies power only to its own terminators. (Factory setting)
Jumper horizontally between positions 7 and 8 (position A)
means the drive takes power from the SCSI bus, pin 26.
Jumpers installed on both 7 and 8 at same time is allowed.
Default is jumper on position 7.
J5 SCSI ID
----------
SCSI ID 0 SCSI ID 1 SCSI ID 2
+---------+ +---------+ +---------+
| o o 1 | | X o o | | o X o |
| o o o | | X o o | | o X o |
A +-0--1--2-+ +---------+ +---------+
SCSI ID 3 SCSI ID 4 SCSI ID 5
+---------+ +---------+ +---------+
| X X o | | o o X | | X o X |
| X X o | | o o X | | X o X |
+---------+ +---------+ +---------+
SCSI ID 6 SCSI ID 7
+---------+ +---------+
| o X X | | X X X |
| o X X | | X X X |
+---------+ +---------+
Drive ID on SCSI Bus (J6 may be used instead). The drive ID is binary
coded positionwise.
J6 SCSI ID (optional)
---------------------
A A A SCSI ID 0
+-2--1--0----------+ +------------------+
| o o o o o 1 | | o o o o o o |
| o o o o o o | | o o o o o o |
+-1--2--3--4--5--6-+ +------------------+
SCSI ID 1 SCSI ID 2
+------------------+ +------------------+
| o o X o o o | | o X o o o o |
| o o X o o o | | o X o o o o |
+------------------+ +------------------+
SCSI ID 3 SCSI ID 4
+------------------+ +------------------+
| o X X o o o | | X o o o o o |
| o X X o o o | | X o o o o o |
+------------------+ +------------------+
SCSI ID 5 SCSI ID 6
+------------------+ +------------------+
| X o X o o o | | X X o o o o |
| X o X o o o | | X X o o o o |
+------------------+ +------------------+
SCSI ID 7 Sync Spindle
+------------------+ +------------------+ Pin 6
| X X X o o o | | o o o X o o | REF SIG+
| X X X o o o | | o o o X o o |
+------------------+ +------------------+
Remote LED
+------------------+ Pin 3
| o o o o X o | +5V
| o o o o X o |
+------------------+
1,2,3 Either J5 or J6 (optional) may be used to select drive ID.
Both should not be used at same time, because at some future
time, settings may be changed, causing the drive to not
respond correctly. The factory installs no ID jumpers on J5 or
J6 (drive ID 0).
4 Spindle Synchronization
5 Used if needed for a connection to a remote LED indicator.
6 Reserved.
On SCSI I/O drives either J6 (on the front of the drive) or J5 (on
the side behind the DC Power connector) may be used to set the drive
ID. To avoid possible incorrect ID setting, do not use both J5 and
J6 for ID selection.
J3 DC Power and pin connector assignments
-------------------------------------------
-------------------+
--+ +-----J3-----+| pin 1 +12 VDC
1| | 4 3 2 1 || pin 2 +12 Volts Return
-+ +------------+| pin 3 + 5 Volts Return
------------------+ pin 4 + 5 VDC
**********************************************************************
G E N E R A L
**********************************************************************
SEAGATE SUPPORT SERVICES
Seagate Technology
------------------
Technical Support Services
If you need assistance installing your drive, consult your dealer.
Dealers are familiar with their unique system configurations and can
help you with system conflicts and other technical issues. If you
need additional assistance with your Seagate(r) drive or other
Seagate products, use one of the Seagate technical support services
listed below.
SeaFONE at 1-800-SEAGATE (1-800-732-4283)
Seagate's 800 number allows toll-free access to automated self-help
services, providing answers to commonly asked questions,
troubleshooting tips and specifications for disc drives and tape
drives. This service is available 24 hours daily and requires a
touch-tone phone. If you need to speak to a technical support
engineer, dial this number and listen to the options for technical
support. (International callers can also reach this automated
self-help service by dialing 408-456-4496).
Seagate Technology online services
Using a modem, you can obtain troubleshooting tips, free utility
programs, drive specifications and jumper settings for Seagate's
entire product line. You can also download software for installing
and analyzing your drive.
SeaNET
You can obtain technical information on Seagate drives, Seagate
software and much more over the Internet from Seagate's World Wide
Web home page (http://www.seagate.com) or Seagate's ftp server
(ftp://ftp.seagate.com).
You may also send E-mail with your questions to DiscSupport@
Seagate.com or TapeSupport@Seagate.com.
SeaBOARD
SeaBOARD is a computer bulletin board system (BBS) that contains
information about Seagate's disc and tape drive products and is
available 24 hours daily. Set your communications software to eight
data bits, no parity and one stop bit (8-N-1). SeaBOARD phone numbers
are listed in the following table.
BBS Location Modem number
United States Disc: 408-434-1080; Tape: 408-456-4415
England 44-1628-478011
France 33 1-48 25 35 95
Germany 49-89-140-9331
Singapore 65-292-6973
Thailand 662-531-8111
Australia 61-2-9756-2359
Taiwan 886-2-719-6075
Seagate CompuServe forum
Online technical support for Seagate products is available on
CompuServe. To access our technical support forum, type go seagate.
This forum provides information similar to that found on SeaBOARD.
In addition, you can type questions or browse through previous
questions and answers on the forum messages.
Seagate Technology FAX services
SeaFAX
You can use a touch-tone telephone to access Seagate's automated FAX
system to receive technical support information by return FAX. This
service is available 24 hours daily.
Location Telephone number
United States 1-800-SEAGATE or 408-456-4496
England 44-1628-894084
Australia 61-2-9756-5170
Seagate technical support FAX
You can FAX questions or comments to technical support specialists 24
hours daily. Responses are sent during business hours.
Location FAX number
United States 408-944-9120
England 44-1628-890660
France 33 1-46 04 42 50
Germany 49-89-1430-5100
Australia 61-2-9725-4052
Singapore 65-293-4722
Hong Kong 852-2368 7173
Taiwan 886-2-715-2923
Korea 82-2-556-7294/4251
Seagate technical support
You can talk to a technical support specialist during business hours
Monday through Friday for one-on-one technical help. Before calling,
note your system configuration and drive model number (STxxxx). There
are several technical support phone numbers available for various
Seagate products.
Location Telephone number
United States Please dial 1-800-SEAGATE for the specific product
telephone number.
(6:00 A.M. to 11:15 A.M., 12:30 P.M. to 5:00 P.M.,
Pacific time, M-F)
England 44-1628-894083 (10:00 A.M. to 1:00 P.M., 2:00 P.M. to
5:00 P.M., M-F)
France 33 1-41 86 10 86 (9:30 A.M. to 12:30 P.M., 2:00
P.M. to 5:00 P.M., M-F)
Germany Disc: 49-89-140-9332; (9:30 A.M. to 12:30 P.M., 2:00
P.M. to 4:00 P.M., M-F)
Tape: 49-89-140-9333
Australia 61-2-9725-3366 (9:00 A.M. to 5:00 P.M., M-F)
Singapore 65-290-3998 (9:00 A.M. to 12:00 P.M., 2:00
P.M. to 5:00 P.M., M-F)
Hong Kong 852-2368 9918
Taiwan 886-2-514-2237
Korea 82-2-556-8241
SeaTDD 408-944-9121
Using a telecommunications device for the deaf (TDD), you can send
questions or comments 24 hours daily and exchange messages with a
technical support specialist between 6:00 A.M. to 11:15 A.M. and
12:30 P.M. to 5:00 P.M. (Pacific time) Monday through Friday.
Customer Service Centers
Seagate direct OEM, Distribution, System Integrator and Retail
customers should contact your Seagate Service Representative for
warranty information. Other customers contact your place of
purchase. Seagate offers comprehensive customer support for all
Seagate drives. Seagate customer service centers are the only
facilities authorized to service Seagate drives. These services are
available worldwide.
Location Telephone number FAX number
United States 1-800-468-3472; 405-949-6740
Other Americas
(Canada & Brazil) 405-949-6706; 405-949-6738
Mexico 525-546-6965; 525-546-4888
Europe, Middle
East & Africa 31-2065-43300; 31-2065-34320
Asia Pacific &
Australia 65-485-3595; 65-485-4980
Japan 81-3-5462-2904; 81-3-3462-2979
Seagate, Seagate Technology and the Seagate logo are registered
trademarks of Seagate Technology, Inc. SeaFAX, SeaFONE, SeaBOARD,
SeaTDD, SeaNET, Medalist and DiscWizard are either trademarks or
registered trademarks of Seagate Technology, Inc. or one of its
subsidiaries. All other trademarks or registered trademarks are the
property of their respective owners.