C F A - 2 7 0 S CONNER
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 3.5"/SLIMLINE Cylinders 2805| | |
Capacity form/unform 270/ MB Heads 2| | |
Seek time / track 12.0/ 3.0 ms Sector/track | | |
Controller SCSI2 SINGLE-ENDED Precompensation
Cache/Buffer 256 KB SEGMENTED Landing Zone
Data transfer rate 4.000 MB/S int Bytes/Sector 512
10.000 MB/S ext SYNC
Recording method RLL 1/7 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 5 55 | -40 60
Power: sleep 0.9 W Humidity % 8 80 | 8 80
standby 0.9 W Altitude km -0.061 4.500| -0.061 4.500
idle 3.8 W Shock g 5 | 50
seek 5.0 W Rotation RPM 4500
read/write 4.8 W Acoustic dBA 38
spin-up W ECC Bit
MTBF h 300000
Warranty Month
Lift/Lock/Park YES Certificates
**********************************************************************
L A Y O U T
**********************************************************************
CONNER CFA-170S/270S/340S/540S CUSTOMER OPTIONS
+---------------------------------------------------------+
| +T1|XX
| +-+ || |XX
| | | || |XX
| | | || |XX I
| | | ++ |XX N
| +-+ E1-+ |XX T
| +-+ |XX E
| ++ |XX R
| || |XX F
| || |XX A
|+-+SS GND || |XX C
||x|LED T2+ |XX E
||x| |XX
|+-+ |
|+-+S1 |XX
||x| | |XX Power
|+-+S5 |xx
+---------------------------------------------------------+
^
|
|
|
|
|
+---------------------------------------------+
-LED | S3
SS +LED S2 |RESERVED
++ GND | S1 | | | ++
|+--------------------------------+ +++++ ++++++++++ | | | +-++||
| | |||| |||||||||| ++++++++++||
| +--++++-++++++++++-+++++++++++|
| |
| |
+---------------------------------------------------------------+
**********************************************************************
J U M P E R S
**********************************************************************
CONNER CFA-170S/270S/340S/540S CUSTOMER OPTIONS
Jumper Setting
==============
S1-S3 SCSI ID
-------------
+----------+-----------------------+
| SCSI ID | Jumpers |
| | S3 | S2 | S1 |
+----------+-------+-------+-------+
| 0 | OPEN | OPEN | OPEN |
+----------+-------+-------+-------+
| 1 | OPEN | OPEN | CLOSED|
+----------+-------+-------+-------+
| 2 | OPEN | CLOSED| OPEN |
+----------+-------+-------+-------+
| 3 | OPEN | CLOSED| CLOSED|
+----------+-------+-------+-------+
| 4 | CLOSED| OPEN | OPEN |
+----------+-------+-------+-------+
| 5 | CLOSED| OPEN | CLOSED|
+----------+-------+-------+-------+
| 6 | CLOSED| CLOSED| OPEN |
+----------+-------+-------+-------+
| 7 | CLOSED| CLOSED| CLOSED|
+----------+-------+-------+-------+
Termination and Jumpers
-----------------------
E1 OPEN Terminator Power from Drive
CLOSED Terminator Power from Interface
Terminators T1, T2: Remove both unless the Drive is the last one
on the SCSI Cable.
NOTE:
SCSI PARITY IS ALWAYS ENABLED!