C F S - 8 5 0 A ( 1 2 / 1 9 9 4 ) CONNER
NO MORE PRODUCED Native| Translation
------+-----+-----+-----
Form 3.5"/SLIMLINE Cylinders 3687| 1652| |
Capacity form/unform 850/ MB Heads 4| 16| |
Seek time / track 15.0/ 3.0 ms Sector/track | 63| |
Controller IDE / ATA2 FAST/ENHA Precompensation
Cache/Buffer 64 KB Landing Zone 1652
Data transfer rate MB/S int Bytes/Sector 512
13.000 MB/S ext
Recording method RLL 1/7 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 5 55 | -40 60
Power: sleep 1.0 W Humidity % 8 80 | 8 80
standby 1.0 W Altitude km -0.061 3.048| -0.061 12.192
idle 3.9 W Shock g 5 | 75
seek 5.6 W Rotation RPM 3600
read/write 4.2 W Acoustic dBA 39
spin-up W ECC Bit
MTBF h 250000
Warranty Month
Lift/Lock/Park YES Certificates
**********************************************************************
L A Y O U T
**********************************************************************
CONNER CFS-850A QUICK REFERENCE GUIDE DEC. 94 REV. C
+---------------------------------------------------------+
| +-+ |XXJ4
| | |HDA |xx1 Power
| | | |XXJ2
| | | |XX
| +-+ |XXI
| |XXN
| |XXT
| |XXE
| |XXR
| |XXF
| |XXA
|+-+C/D |XXC
|| |ATA/ISA |XXE
|| |CS | 1
|| | |XXJ6
|+-+ |XX Power
+---------------------------------------------------------+ 1
**********************************************************************
J U M P E R S
**********************************************************************
CONNER CFS-850A QUICK REFERENCE GUIDE DEC. 94, REV. C
Jumper Setting
==============
The C/D Jumper is used to determine the drive is a master (drive C)
or a slave (drive D). The drive is configured as a master, when
jumpered, and a slave when not jumpered.
C/D A/C CS
o x x Cable Select
o X X Master or Slave
C/D A/C CS
x x o Master/Standalone
X X o
C/D A/C CS
o x o Slave
o X o
**********************************************************************
I N S T A L L
**********************************************************************
CONNER CFS-850A QUICK REFERENCE GUIDE DEC. 94, REV. C
Notes on Installation
=====================
Installation direction
----------------------
horizontally vertically
+-----------------+ +--+ +--+
| | | +-----+ +-----+ |
| | | | | | | |
+-+-----------------+-+ | | | | | |
+---------------------+ | | | | | |
| | | | | |
| | | | | |
+---------------------+ | +-----+ +-----+ |
+-+-----------------+-+ +--+ +--+
| |
| |
+-----------------+
The drive will operate in all axis (6 directions).
J6 Standard 4-pin Power Connector
---------------------------------
+-----------------------
| +-----J6-----+ +---- pin 1 +12V
| | 1 2 3 4 | | 1 pin 2 GND
| +------------+ +-- pin 3 GND
+------------------ pin 4 +5V
J4 Optional 3-pin Power Connector
---------------------------------
+------------------------------
| +---J4----+ +------------- pin 1 +5 V
| | 3 2 1 | | 40 pin 2 +12V
| +---------+ +-------------- pin 3 GND
+----------------------------------
Mounting Holes
--------------
Side: 6-32 UNC-2B .16 max. insertion
Bottom: 6-32 UNC-2B .22 max. insertion